Colony Flow! Level 2 Walkthrough
Beginner
How to clear Colony Flow! Level 2
Colony Flow! Level 2 is a corridor-heavy board built around the Magenta and Teal pairs — few colors on screen, which makes it easy to spot crossing paths. Most failed runs here happen in the first three moves, so the order below matters more than speed.
- 1
Survey the Magenta lines
Find every Magenta and Teal pixel before touching anything. A quick scan of where the Magenta corridor can go decides the whole board.
- 2
Open with the ${corner} corner
Start by dragging the Magenta pair in the top-right corner home. That line never blocks another color, and it frees the edge so the inner routes stay open.
- 3
Route the Teal pair before it seals
Watch the Teal pixels crossing the Magenta route near the right side. Clear the Teal pair first — if the Magenta line seals that corridor early, the Teal pair is cut off and the run restarts.
- 4
Clear the long edge routes
Edge lines never need the center. Take them while the board is still open, then check the Teal pair is still reachable before moving on.
- 5
Re-check the Magenta path
After the edge work, Magenta usually has one clear lane left. Trace it mentally — if another color has grown into it, undo one step instead of forcing it.
- 6
Finish the center last
Settle the inner pairs once the edges are done. The center needs the most open space, so it always goes last on a beginner board like this one.
Pro tips for Colony Flow! Level 2
Outside in
Handle outer pairs first, then move inward. It prevents inner pixels from being blocked and works for almost every stage.
Mind the Magenta corridor
Do not let the Magenta line fill a corridor completely — the Teal pair needs to cross it later on this board. Leave one open cell.
Reset when lost
If you have made four or more moves without a clear plan for Teal, restart. A fresh board is faster than salvaging a tangled state.
