Colony Flow! Level 46 Walkthrough
Beginner
How to clear Colony Flow! Level 46
Colony Flow! Level 46 is a dense board built around the Pink and Orange pairs — few colors on screen, which makes it easy to spot crossing paths. Most failed runs here happen in the first three moves, so the order below matters more than speed.
- 1
Survey the Pink lines
Find every Pink and Orange pixel before touching anything. A quick scan of where the Pink corridor can go decides the whole board.
- 2
Open with the ${corner} corner
Start by dragging the Pink pair in the top-right corner home. That line never blocks another color, and it frees the edge so the inner routes stay open.
- 3
Route the Orange pair before it seals
Watch the Orange pixels crossing the Pink route near the right side. Clear the Orange pair first — if the Pink line seals that corridor early, the Orange pair is cut off and the run restarts.
- 4
Clear the long edge routes
Edge lines never need the center. Take them while the board is still open, then check the Orange pair is still reachable before moving on.
- 5
Re-check the Pink path
After the edge work, Pink usually has one clear lane left. Trace it mentally — if another color has grown into it, undo one step instead of forcing it.
- 6
Finish the center last
Settle the inner pairs once the edges are done. The center needs the most open space, so it always goes last on a beginner board like this one.
Pro tips for Colony Flow! Level 46
Outside in
Handle outer pairs first, then move inward. It prevents inner pixels from being blocked and works for almost every stage.
Mind the Pink corridor
Do not let the Pink line fill a corridor completely — the Orange pair needs to cross it later on this board. Leave one open cell.
Reset when lost
If you have made four or more moves without a clear plan for Orange, restart. A fresh board is faster than salvaging a tangled state.
